Harmonic ProView PVR 6000 Series User Manual page 176

The available options are:
•
•
A
NALOG
The Analog Mixer parameter, displayed on the following screen, allows setting
the stereo and mono options of the stereo channels.
1
2
3
4
5
The available options are:
•
•
•
•
•
N
OTES
Audio 2 Parameters menu is identical in its form and functionality to the Audio 1
arameter
P
Recall that Audio 3 and Audio 4 menus correspond with Video2, and are also
identical in form and functionality to Audio 1 and Audio 2.
Page 4-106
MUTE – this analog audio output is disabled
UNMUTE (PLAY) – this analog audio output is enabled
M
IXER
Analog Mixer
STEREO(L & R)
MONO MIXING
SWAP (R & L)
BOTH RIGHT
BOTH LEFT
STEREO (L & R) – Standard stereo output on the respective left and right
connectors
MONO MIXING – Mixes left and right stereo channel signals for mono
output on both left and right connectors
SWAP (R & L) – Swaps channels:
• Left channel on right connectors
• Right channel on left connectors
BOTH RIGHT – Outputs right channels on both left and right connectors
BOTH LEFT – Outputs left channels on both left and right connectors
s menu (see Error! Reference source not found.).
User Manual
Operation and Management
(Rev. 4.1/ SW v1.60/ December 2006)