Harmonic ProView PVR 6000 Series User Manual page 98

1
2
4.2.2.5. IP Receiver Configuration Menu
This section details the front panel menus that enable configuring the IP receiver
in a PVR 6000 IP front end device.
The following is the IP Receiver Configuration menu as it is displayed on the
PVR 6000 front panel screen:
MPEGoIP Input 1
1
MPEGoIP Input 2
2
General
3
The available options are:
•
•
•
MPEG
The MPEGo-IP Input 1 sub-menu allows the user to configure the MPEGoIP
receiver connected to the rear panel MPEGoIP interface.
N
OTE
MPEGoIP Input 2 menu is identical to the MPEGoIP Input 1 menu
Physical Link
1
Logical Source
2
FEC
3
Page 4-28
VPI Address
Enable
Disable
Receiver
MPEGoIP Input 1 - allows the user to configure the MPEGoIP receiver
connected to the rear panel MPEGoIP IN 1 interface
MPEGoIP Input 2- allows the user to configure the MPEGoIP receiver
connected to the rear panel MPEGoIP IN 2 interface
General - allows the user to configure parameters such as redundancy, De-
jittering delay, and FEC.
IP I
O NPUT
MPEGoIP Input 1
1
User Manual
Operation and Management
1-2-1-1
(Rev. 4.1/ SW v1.60/ December 2006)
1-2-1