PVR 6000 Series
Professional Integrated Receiver Decoders
N
OTE
In the case of power failure or system shutdown, ASI OUT 1 output will become
ASI loop-through. Use ASI OUT 1 output for cascading a chain of PVR 6000.
1.5.4.4. PVR 6030 Interfaces and Features
The PVR 6030 is a single 4:2:0 decoder. The entire PVR 6030 family consists of
two composite video interfaces. The CVBS #1 connector is used for broadcast
quality video and the CVBS #2 connector is used for monitoring.
Figure 1-10 illustrates the PVR 6030 rear panel. The PVR 6030 basic features
and software-licensed features are described below.
Figure 1-10:
Basic Features
•
•
•
•
•
•
•
•
•
•
PVR 6030 Rear Panel
1 composite video - Broadcast
quality (upper connector)
1 composite video - Monitoring
quality (lower connector)
2 SDI interfaces
Embedded VBI and up to 2 stereo
channels in SDI
2 active analog-audio-stereo
balanced interfaces
2 active AES/EBU-SPDIF audio-
balanced interfaces
SNMP management (10/100 Base-T)
Web-based management (10/100
Base-T)
GPI
Front panel A/V monitoring
connectors
Software-Licensed Features
•
ASI input
•
Dual (identical) ASI output
•
MPEG-over-IP output or IP data
output (MPE de-capsulation)
•
Genlock input and loop-through
output
•
Dolby Digital (AC-3) LT/RT
downmixing
•
Pro MPEG FEC
•
IP Dual input (link and source
redundancy
•
PID and service filtering
•
RS-232 low speed data output
Page 1-11