Harmonic ProView PVR 6000 Series User Manual page 146

N
OTE
The number of Video Channel Configurations (as well as the VBI) provided in the
Video Configuration menu is dynamic and is determined by the PVR 6000 model.
To access the Video Configuration Menu in the front panel control interface go
to Configuration Video.
The following screen displays the Video menu:
Video 1
1
VBI 1
2
Osd 1
3
Video 2
4
VBI 2
5
Osd 2
6
The Video Configuration parameters are as follows:
•
•
•
•
•
Page 4-76
Video
Video 1
This group contains parameters that define the format, lip-sync mode and STC-PCR
delay parameters for the video stream for a signal to decoder #1.
For details on the Video 1 Parameter, see Section 4.2.6.1.
VBI 1
This group contains parameters that define VBI functioning for Decoder #1.
For details on the VBI 1 Parameter, see Section 0.
Osd 1
This group contains parameters that define OSD functioning for Decoder #1.
Video 2 (if available)
This group contains parameters that define the format, lip-sync mode and STC-PCR
delay parameters for the video stream for a signal to decoder #2.
For details on the Video 2 Parameter, see Section 4.2.6.1.
VBI 2 (if available)
This group contains parameters that define VBI functioning for the PVR 6000
Decoder #2.
For details on the VBI 2 Parameter, see Section 4.3.4.2.
User Manual
Operation and Management
1-2-4
(Rev. 4.1/ SW v1.60/ December 2006)