Harmonic ProView PVR 6000 Series User Manual page 111

PVR 6000 Series
Professional Integrated Receiver Decoders
S
OURCE
When the receiver is active in the IRD, the following menu is displayed:
FRONT-END (QPSK)
1
ASI
2
SERIAL RS-422
3
None
4
N
OTE
The Decoder Stream Source screen is dynamic and it changes according to the
currently-active PVR 6000 interface.
The available options are:
• FRONT-END (if applicable) – Selects the Receiver Front-End Interface as
the source for the input transport stream
• ASI – Select the ASI digital input as the source for the input transport
stream
• SERIAL RS-422 – Selects the RS-422 serial input as the source for the
input transport stream
N
OTE
Only qualified personnel should handle serial RS-422 option.
• None - No input source is selected for the PVR 6000.
N
OTE
When Front-End (IP) is selected, the 27 MHz Synchronization option must
be set to Fixed-Value (see next page).
Source
Page 4-41