Harmonic ProView PVR 6000 Series User Manual page 107

PVR 6000 Series
Professional Integrated Receiver Decoders
The available options are:
• ENABLE – enables redundancy; when a redundancy event occurs the
physical link and logical source switch to passive ones
• DISABLE - disables redundancy
R
EDUNDANCY
The Redundancy delay menu is used for setting the time delay, which defines
a redundancy event.
005 [Sec]
<000 - 255>
Redundancy delay values range from 0 to 255 seconds.
D -J
E
The De-jitter Delay menu is used for setting the decoder's De-Jitter delay in
milliseconds.
The aim of the De-Jittering mechanism is to eliminate the inherent jitter
introduced by a typical IP network. This mechanism practically acquires the
source exact frequency and follows it. The PVR 6000 supports de-jittering of CBR
(Constant Bit Rate) streams.
The de-jitter delay configurability enables only optimizing unit-performance
according to specific needs. The longer the delay, the longer the jitter that can
be eliminated (traded off by longer latency).
0100 [mSec]
<0000 - 6000>
De-jitter delay values range from 0 to 6000 milliseconds.
D
ELAY
Redundancy Delay
D
ITTER ELAY
De-Jitter Delay
Page 4-37