Harmonic ProView PVR 6000 Series User Manual page 144

The available options are:
•
NOTE
When Auto call first active mode is selected, the PVR 6000 might switch to the
first detected program when the TS is interrupted for any reason.
•
S
ERVICE
This parameter defines which ES will be decrypted by the CAM. It is possible to
either instruct the PVR 6000 to decrypt all the received ES, or allow it to decrypt
only the ones that are currently being decoded.
1
2
The available options are:
•
•
Page 4-74
Auto. Call 1st Active – The PVR 6000 locks-onto the first active service
detected in the transport-stream. This mode is recommended for DSNG and
other applications that frequently change the decoded program.
Wait for User Select – The PVR 6000 searches for a specific (user-defined)
service to lock-on to the PVR 6000 is tuned to decode the selected program,
even if it does not exist in the TS. This mode is recommended for broadcast
applications where the decoded program is fixed, and seldom changes.
CAS O
PEN
Service CAS Open
DECODED PID'S
ALL PMT PID'S
DECODED PID'S – the CAM descrambles only the PIDs that are currently
decoded by the PVR 6000
ALL PMT PID'S - the CAM descrambles all the received PIDs
User Manual
Operation and Management
(Rev. 4.1/ SW v1.60/ December 2006)