Harmonic ProView PVR 6000 Series User Manual page 185

PVR 6000 Series
Professional Integrated Receiver Decoders
O
PERATIONAL
The Operational Mode screen displays the currently active mode of operation
and allows setting the mode using the following Select Value screen:
MPEGoIp
1
MPE
2
The available options are:
• MPEGoIp – MPEG-over-IP mode
• MPE – IP data (MPE de-capsulation)
N
OTE
When Operational mode is set to MPEG-over-IP, all other items in the IP-Out-
Port menu must be configured. When Operational mode is set to MPE, then the
IP address, Subnet Mask, and Default Gateway items must be configured.
P
ROTOCOL
The Protocol screen displays the currently active L3 protocol and allows setting
the protocol using the following Select Value screen.
UDP
1
RTP
2
The available options are:
• UDP – User Datagram Protocol
• RTP – Real Time Protocol (this feature will be supported in future software
releases)
M
ODE
Operational Mode
Protocol
Page 4-115