Harmonic ProView PVR 6000 Series User Manual page 226

4.3.4.1. Video 1 (and Video 2)
The Video 1 Menus (and Video 2 in dual decoder IRDs) display video
parameter Statuses.
To access the Video 1 Menu in the front panel control interface go to
Status Video Video 1.
The following screen displays the Video 1 menu:
Standard Format
1
Frame Rate
2
Chroma Format
3
Resolution
4
Aspect Ratio
5
Field Sequence
6
Picture Coding Type
7
Bit Rat
8
VBV Buffer Size
9
10
N
OTE
The "Decoding Errors" parameter indicates the video stream health.
Page 4-156
Video 1
Decoding Errors
The available information is:
• Standard Format – Indicates the number of lines in the incoming video.
In this example, 625 lines indicate PAL video format.
• Frame Rate – Displays the frame rate of the incoming video stream
• Chroma Format – Displays the Chroma format currently used for the
incoming video stream
• Resolution – Displays the horizontal and vertical video resolutions for
the incoming video stream (for example, the number of pixels per
horizontal and vertical screen lines)
• Aspect Ratio – Displays the aspect ratio for the incoming video stream
• Field Sequence – Displays the type of field sequence found in the
decoded service. There are two available values: Normal, and 3:2
Pulldown
User Manual
Operation and Management
1-3-4-1
625 [Ln]
25 [Hz]
H:720 * V:608
11080800 [Bps]e
04096000 [Bit]
(Rev. 4.1/ SW v1.60/ December 2006)
4:2:0
4:3
NORMAL
P-B
000000