Harmonic ProView PVR 6000 Series User Manual page 97

PVR 6000 Series
Professional Integrated Receiver Decoders
• FEC – this parameter allows the user to enable FEC for
the ATM receiver.
M
ODE
The Mode parameter allows the user to set the operational mode of the ATM
receiver. The following is the front panel Mode screen:
1
2
2
4
5
6
VPI A
The VPI Address parameter allows the user to set the path address for the ATM
receiver. The following is the front panel VPI Address screen:
01[Hex]
<00-FF>
The available values range from 00 to FF.
VCI A
The VCI Address parameter allows the user to set the channel address for the
ATM receiver. The following is the front panel VCI Address screen:
0020[Hex]
<0000-FFFF>
The available values range from 00 to FF.
FEC
The FEC parameter allows the user to enable or disable FEC for the ATM
receiver. The following is the front panel FEC screen:
Mode
E3
DS3
STM-1 MULTI MODE
STM-1 SINGLE MODE
OC-3 MULTI MODE
OC-3 SINGLE MODE
DDRESS
VPI Address
DDRESS
VPI Address
Page 4-27