Harmonic ProView PVR 6000 Series User Manual page 183

PVR 6000 Series
Professional Integrated Receiver Decoders
4.2.8.2. IP-Out-Port Configuration Menu
N
OTE
When selecting MPE mode verify that the MPE encapsulator setup is such that
the MPEG packet contains data of a single IP frame (for example, a single MPEG
packet cannot contain data belonging to two separate IP frames).
This menu is used for setting the IP-Out port parameters.
To access the IP-Out-Port Menu in the front panel control interface go to
Configuration Data IP Out Port.
The following screen displays the IP Out Port menu:
Operational Mode
1
Protocol
2
IP Address
3
Network Mask
4
Default Gateway
5
Dest IP Address
6
UDP Source Port
7
UDP Destination Port
8
Num of Packets
9
IP Out Port
1-2-6-2
MPEGoIP
UDP
010.008.000.216
255.255.255.000
010.008.000.001
010.013.100.003
02000
02000
07
Page 4-113