Figure D-1: Front panel warning LEDs
The available LEDs are:
•
WARNING – indicates any detected error by an
orange light.
•
PWR/FAIL – indicates hardware errors by a red
light.
When the PVR 6000 is properly functioning, both LEDs light green.
D.3
W
Warning messages appears on the front panel screen when an error is detected.
The warning message briefly describes the level of the malfunction.
The following are Satellite front-end warnings:
•
Signal Not Received
•
Demodulator Not Sync
•
Viterbi Not Sync
Page D-2
ARNING MESSAGES
User Manual
Appendix D
Warning Messages
(Rev. 4.1/ SW v1.60/ December 2006)