Harmonic ProView PVR 6000 Series User Manual page 102

L
OGICAL SOURCE
The Logical source menu is used for configuring the connection with the end
device ("logical port").
IP Address Type
01
IP Multicast Address
02
UDP Destination Port
03
The available options are:
•
•
•
IP A
This menu is used for choosing the Multicast or Unicast address type.
1
2
The available options are:
•
•
Page 4-32
(
Logical Source
IP Address Type - for choosing between Multicast and Unicast address
types
IP Multicast Address
only when Multicast IP address type is selected)
UDP Destination Port - the logical port's UDP port from which to receive
data
T
DDRESS YPE
IP Address Type
MULTICAST
UNICAST
MULTICAST – for selecting Multicast IP address type. When selected, the IP
Multicast address menu is displayed, which enables configuring the Multicast
address. An IGMP Join request is sent for connecting with the IP Multicast
address that was configured. The PVR 6000 filters the relevant transport
stream with the configured Multicast IP address and UDP port.
UNICAST - for selecting Unicast IP address type. The PVR 6000 filters the
relevant transport stream only by the configured UDP port.
Operation and Management
)
SOCKET
the logical port's IP address (this menu is displayed
-
User Manual
1-2-1-1-2
MULTICAST
224.010.010.010
(Rev. 4.1/ SW v1.60/ December 2006)
02000