PVR 6000 Series
Professional Integrated Receiver Decoders
N
OTES
This model requires a breakout cable to connect to the 3
pairs.
In the case of power failure or system shutdown, ASI OUT 1 output will become
ASI loop-through. Use ASI OUT 1 output for cascading a chain of PVR 6000.
1.5.4.6. PVR 6050 Interfaces and Features
The PVR 6050 is a single 4:2:2 decoder. The PVR-6050 family consists of two
composite video interfaces. Both CVBS interfaces are for service broadcast video
quality.
Figure 1-12 illustrates the PVR 6050 rear panel. The PVR 6050 basic and
software-licensed features are also detailed.
Figure 1-12:
Basic Features
•
2 composite video interfaces – Broadcast
quality
•
2 SDI interfaces
•
Embedded VBI and up to 4 stereo
channels in SDI
•
Decoding 4:2:2 PP@ML (1.5–50 Mbps)
•
2 out of 4 active analog-audio-stereo
balanced interfaces
•
2 out of 4 active AES/EBU-SPDIF audio-
balanced interfaces
•
Genlock input and loop-through output
•
SNMP management (10/100 Base-T)
PVR 6050 Rear Panel
rd
th
and 4
Software-Licensed Features
•
ASI input
•
Dual (identical) ASI output
•
MPEG-over-IP output or IP data
output (MPE de-capsulation)
rd
•
3
Active analog stereo pair
th
•
4
Active analog stereo pair
rd
•
3
Active AES/EBU-SPDIF
th
•
4
Active AES/EBU-SPDIF
•
Dolby Digital (AC-3) LT/RT
downmixing
•
Linear PCM (SMPTE 302M 2000),
Dolby-E pass-through
analog stereo
Page 1-13