Chapter 3. Pvr 6000 Control Interfaces; Pvr 6000 Front Panel Screen Types - Harmonic ProView PVR 6000 Series User Manual

•
•
•
•
•
3.1.2. PVR 6000 Front Panel Screen
Types
The PVR 6000 display leads to the following five screen types:
•
•
•
•
•
N
OTE
The Front panel can display only up to four menu items at a time. When a menu
has more than four items, the first four are visible in the panel, followed by a
scroll icon [
arrows. To illustrate the difference between the two types of items, two types of
screen shots were used in this user manual: dark grey for the visible items and
light grey for the hidden ones.
Page 3-2
Status LEDs
The two LEDs indicate WARNING and PWR/FAIL statuses, when both LEDs are lit
green the PVR 6000 status is OK. The WARNING LED (Green/Orange) indicates the
operational status. The PWR/FAIL LED (Green/Red) indicates the hardware status.
Arrow Keys
The arrow keys include [Up], [Down], [Right], [Left]. The keys are used to
navigate between the different menu items and sub-menus. They are also used
to select and change parameters during setup and configuration procedures.
[Enter] Key
Used to select or enter a configuration setup.
[Esc] Key
Used to abort a configuration setup or to return to the menu's previous level.
Short Cut Keys
Include the [F1]/[F2] buttons that are operator–programmable for
immediate activation of predefined procedures (in the future software
versions).
Menu Navigation screen
Edit Menu screen
Table Menu screen
Edit Value screen
Select Value screen
]. Additional items can be accessed using the [up]/[down]
User Manual
PVR 6000 Control Interfaces
(Rev. 4.1/ SW v1.60/ December 2006)