Harmonic ProView PVR 6000 Series User Manual page 181

PVR 6000 Series
Professional Integrated Receiver Decoders
4.2.8.1. Low Speed Data Port
This menu is used for setting the PVR 6000 Low Speed Data port parameters.
The PVR 6000 supports Low Speed Data output through RS232. It enables
different rates of transmission, as well as three levels of output-data filtering.
N
OTE
The PVR 6000 automatically directs PIDs with the MPEG-2 descriptor -
private_data_indicator = 15 with indicator value 0 for transmission through its
Low Speed Data port.
The minimum amount of data that can be transmitted through the LS Data port
is the size of one PES payload.
To access the Low Speed Data menu, in the front panel control interface go to
Configuration Data Low Speed Data Port
Following is the corresponding front-panel screen:
Baud Rate
1
Layer Filtering
2
The Low Speed Date Port screen contains the following parameters:
•
•
The following paragraphs provide details of these parameters.
Low Speed Data Port
Baud Rate
Layer Filtering
1-2-6-1
115200 [Baud]
P.E.S Payload
Page 4-111