Harmonic ProView PVR 6000 Series User Manual page 100

P
HYSICAL
The physical Link menu is used for enabling the operation of the physical link
(the MPEGoIP IN1 interface in this example), as well as for configuring its
parameters.
Operation
01
IP Address
02
Subnet Mask
03
Default Gateway
04
Available options are
•
•
•
•
N
OTE
The operator must enter valid IP addresses before the PVR 6000 can operate. If
one or more IP addresses are not entered correctly, the following message is
displayed: "Front-End Warning – IP Configuration Error". This message
remains until all IP addresses are entered correctly.
O
PERATION
The Operation menu is used for enabling or disabling this MPEGoIP input port.
1
2
The available options are:
•
•
Page 4-30
L
INK
Physical Link
Operation - for enabling or disabling this port
IP Address - this MPEGoIP input port's IP address
Subnet Mask - this MPEGoIP input port's Subnet Mask
Default Gateway - the default gateway address
Operation
ENABLE
DISABLE
ENABLE – enables the relevant MPEGoIP input (MPEGoIP IN1 in this
example)
DISABLE - disables the relevant MPEGoIP input (MPEGoIP IN1 in this
example).
User Manual
Operation and Management
1-2-1-1-1
DISABLE
010.006.000.196
255.255.255.000
010.006.000.001
(Rev. 4.1/ SW v1.60/ December 2006)