Harmonic ProView PVR 6000 Series User Manual page 188

N
UMBER OF
The Number of Packets parameter allows setting the number of MPEG packets
to be contained in an IP frame (using the following Edit Value Screen).
07
<01-07>
Available values are between 1 and 7.
4.2.8.3. High Speed Data
HS data is only supported in PVR 6000 and PVR 6060 models.
The High Speed Data Menu is used for setting the transfer rate & direction
(MSB↔LSB) and the type of data to be sent, through the High Speed Data port.
To access the High Speed Data Menu in the front panel control interface go to
Configuration Data High Speed Data Port.
Following is the corresponding front-panel screen:
Tx Clock
1
Tx Direction
2
Layer Filtering
3
The HS Data parameters are detailed as follows:
T
X
The Tx Clock parameter sets the speed of the high speed data port.
01.0
<00.064000 - 27.000000>
Legal values range from 00.064000 to 27.000000 Mbps.
Page 4-118
P
ACKETS
Num of Packets
High Speed Data
C
LOCK
Tx Clock
User Manual
Operation and Management
1-2-6-2
08.307692 [Mb/s]
MSB -> LSB
T.S PAYLOAD
(Rev. 4.1/ SW v1.60/ December 2006)
[Mb/s)