Figure 4-35: Pvr 6000 Dvbs Status Screen - Harmonic ProView PVR 6000 Series User Manual

To enter the Receiver Status menu in the front panel, go to Status
(independently of receiver module type).
4.3.1.1. DVB-S Receiver Status
To access the DVB-S Receiver Status Menu in the front panel control interface
go to Status Receiver.
N
OTE
The LNB L.O. Frequency parameter is activated when the Ku and C-Band is
selected.
The following screen displays the DVB-S Receiver Status menu:
Signal Quality
1
Eb/N0
2
Link Margin
3
Viterbi BER
4
Frequency Tune
5
Frequency Offset
6
Viterbi Rate
7
Spectral Inversion
8
Figure 4-35 displays the corresponding Web management screen.
Figure 4-35:
The available options are:
•
Page 4-146
Receiver
PVR 6000 DVBS Status Screen
Signal Quality – Qualitative indicator of the received signal C/N relative to
the maximum C/N that can be measured without forcing the receiver to
saturation.
User Manual
Operation and Management
09.94[dB]
+04.9dB]
1.068000 [GHz]
+02214[KHz]
(Rev. 4.1/ SW v1.60/ December 2006)
Receiver
1-2-1
100[%]
0.0e-7
5/6
NORMAL