Harmonic ProView PVR 6000 Series User Manual page 180

To access the Data Configuration Menu in the front panel control interface go to
Configuration Data.
All the PVR 6000 models except PVR 6000 and PVR 6060 support the IP-Out-
Port option. Following is the corresponding front-panel screen:
Low Speed Data Port
1
IP Out Port
2
The PVR 6000 and PVR 6060 models support the High Speed Data Port option
(and not IP Out Port). Following is the corresponding front-panel screen for
these models:
Low Speed Data Port
1
High Speed Data Port
2
The Data Configuration Menu parameters are:
•
•
•
Page 4-110
Data
Data
Low Speed Data Port
Sets the type of data to be outputted through the Low Speed Data port. The PVR
6000 supports LS data output in three levels of filtering. For details see Section
4.2.8.1.
IP Out Port
Sets the PVR 6000 IP Out port parameters (e.g. the chosen transfer protocol, the
PVR 6000 IP address, UDP port and so on.). For detailed information, see Section
4.2.8.2.
High Speed Data Port (PVR 6000 and PVR 6060 only)
Sets the transfer rate & direction, and the type of data to be sent, through the
High Speed Data port. For details see Section 4.2.8.3.
User Manual
Operation and Management
1-2-6
1-2-6
(Rev. 4.1/ SW v1.60/ December 2006)