Figure A-10: Port Settings Tab - Harmonic ProView PVR 6000 Series User Manual

User Manual
Appendix A
Software Download
4. Select the Baud Rate. This must be identical to the PVR 6000 baud rate
parameter. See Configuration Unit Serial Control Port Baud Rate.
5. Select Flow Control – None.

Figure A-10: Port Settings Tab

A.2.1.5 Checking PC Terminal Communication with the IRD
After setting the PC - HyperTerminal, the Terminal is opened and the user can
check the connection to the IRD on the HyperT erminal.
Press [Enter]. If the word "Root" appears on the terminal window, the user is
connected with the IRD. /root> indicates the main path to the IRD.
The user can also type "help" to see the PVR 6000 help commands.
Page A-10 (Rev. 4.1/ SW v1.60/ December 2006)