Serial Control Port Configuration; Hw Interface - Harmonic ProView 2900 Installation Manual

Chapter 14: Unit Configuration Menu

14.5. Serial Control Port Configuration

The Serial Control Port menu allows the user setting the serial control port parameters.
To access the Serial Control Port Menu in the front panel control interface go to
Configuration Unit
The following screen displays the Serial Control Port menu:

1 HW Interface

1 HW Interface 1 HW Interface 1 HW Interface
2 SW Protocol 2 SW Protocol
2 SW Protocol 2 SW Protocol
3 Baud Rate 3 Baud Rate 3 Baud Rate 3 Baud Rate
4 Address 4 Address
4 Address 4 Address
Figure 14-6 shows the corresponding Unit Serial Web management screen.
The following paragraphs detail the Unit Serial Control Port configuration options.
14.5.1. HW Interface
1 1 1 1
2 2 2 2
The available options are: RS-232 and RS-485
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Serial Control Port.
Serial Control Port Serial Control Port
Serial Control Port Serial Control Port
Figure 14-6:
HW Interface HW Interface
HW Interface HW Interface
RS232 RS232
RS232 RS232
RS485 RS485
RS485 RS485
Serial Control Port Configuration
Unit Serial Screen
14-6 ProView 2900 Series/SW Version 1.94
1 1 1 1 - - - - 2 2 2 2 - - - - 8 8 8 8 - - - - 2 2 2 2
RS232 RS232 RS232 RS232
TERMINAL ECHO TERMINAL ECHO
TERMINAL ECHO TERMINAL ECHO
115200 [Baud] 115200 [Baud] 115200 [Baud] 115200 [Baud]
FFFF FFFF
FFFF FFFF