Table of Contents
Advertisement
Removal & Installation Procedure
1. Drain the coolant.
2. Remove the de-aeration hose (4), coolant outlet hose (5)
and coolant bypass hose (6).
3. Disconnect the coolant temperature sensor connector.
4. Unscrew the bolt (1c) and pry off the tensioning device shock
absorber (7).
Installation Notice
Tightening Torque
5. Unscrow the bolts (1a, 1b) and remove the engine hanger
bracket and thermostat housing.
Installation Notice
Tightening Torque
6. Replace the O-ring with new one.
7. Installation should follow the removal procedure in the
reverse order.
8. Check for leaks in cooling system.
22.5 - 27.5 Nm
(1a)
9 - 11 Nm
(1b)
22.5 - 27.5 Nm
M161 ENGINE COOLING 1D2-13
Advertisement
Chapters
Table of Contents
