Daewoo KORANDO Service Manual page 411

1B3-110 OM600 ENGINE MECHANICAL
Removal & Installation Procedure
1. Remove the valve tappet (1) with magentic lifter.
Notice
Place the valve tappets upside down (open end upward)
2. Install the holding wheel (7) into the timing chain of camshaft
sprocket piston.
3. Position the piston of relevant cylinder at TDC.
4. Install the supporting bar (8).
5. Using the press lever (9), press the spring retainer(3)
downward and remove the valve cotters (2) with magnetic
finger (10).
Notice
Be careful not to damage guide bore of the valve tappet.
Magentic Liter 102 589 03 40 00
Holding Wheel 603 589 01 40 00
Supporting Bar 667 589 02 63 00
Press Lever 667 589 00 31 00
Magnetic Finger 116 589 06 63 00