Table of Contents
Advertisement
Accessing the Web-based User Interface
NOTE: The user interface shown in this guide is available when using VN-Matrix 200,
The web-based user interface can be accessed using a suitable web browser (for example,
Microsoft
any PC or laptop connected to the VN-Matrix network. With a web browser open, use the
following steps to access the user interface.
1.
2.
225, 300, or 325 devices or a VNM Recorder. This interface is best used when
configuring small systems. For larger systems, using a VNM Enterprise Controller
interface is recommended (see the VNM Enterprise Controller User Guide).
Internet Explorer
v7 or above or Mozilla
®
®
Type in the IP address of the controller device into the address bar of the web browser
(for example, http://192.168.254.254). The web page shown in figure 17 appears in the
browser.
NOTES:
•
If the VNM Recorder is configured as the controller device of the VN-Matrix
network, the IP address must be appended with the port number that is used
as the web page server (for example, http://192.168.254.254:8090).
•
If the web browser cannot access the web-based user interface, the security
settings of the web browser may need to be configured (see
Configuration
on page 68).
Figure 17.
Controller Login Page
Enter the appropriate username and password.
NOTES:
•
By default, these are both set to admin.
•
For information on how to change the password, see
page 41.
VNM Recorder • About the Web-based User Interface
Firefox
v1.3 or above) running on
®
®
Browser
Accounts Page
on
24
Advertisement
Table of Contents
