Table of Contents
Advertisement
TLSI 201 Web Page
To access the TLSI 201 default web page, enter the IP address of the unit into the web
browser of a PC connected to the same subnet.
A dialog opens asking for your user name and password.
NOTES:
The single page provides general and network information about the unit.
•
•
You can also configure the network settings of the TLSI 201 by using the
(see page 10) or Toolbelt.
Figure 18.
The factory configured passwords for all accounts on this device have been set
•
to the device serial number. Passwords can be changed during configuration.
They are case sensitive.
If the device is reset to default settings, the passwords are reset to the default
•
password, which is extron (for either admin or user).
Click the various Edit buttons to change the associated TLSI 201 settings.
Click Select File to navigate to a firmware file saved on the PC and then click
Update to upgrade the unit firmware.
TLSI 201 Web Page
Setup Menu
TLSI 201 • Configuration Software
18
Advertisement
Table of Contents
