Interface Mounting - Extron electronics RGB 460xi Series User Manual

im Vertrieb von
3.
If the interface does not respond to horizontal shifting
If the picture does not move on screen when the horizontal shift
control knob is rotated, DDSP is in use. Set the DDSP DIP
switch to Off.

Interface Mounting

Once the system has been cabled and tested, the interface can be
installed in the wall, furniture, or floor box. To mount the
interface, refer to the installation guide that addresses your
specific requirements.
www.camboard.de
2-12
CAMBOARD Electronics
terminated. If the problem is not resolved by changing the
termination, try using a different input cable. Poor quality
or damaged cable can cause ghosting or blooming.
If the picture still is not displayed correctly, call the Extron
S 3 Sales and Technical Support Hotline.
Tel. 07131 911201 ce-info@camboard.de
RGB 460xi Series • Installation and Operation
Fax 07131 911203