Table of Contents
Advertisement
4.
5.
6.
Initialize Recording
To start recording, check
Figure 32.
NOTE: Recording does not actually start until
Stop Recording
To stop recording, clear the
NOTE: Recording does not actually stop until
Creating Still Frames from a VN-Matrix Video Recording
The gcode Frame Translator Utility allows existing VN-Matrix video recordings to be
converted to a series of individual still frames (see
Instructions
Using the
drop-down menus, choose the VN-Matrix encoder devices that will
source
be recorded from.
NOTE: Channel 1 must always be used when recording. For a single channel
record/playback system, use channel 1 only.
Enter a filename for the stream and an optional description.
To record an associated audio stream, check the audio box. The ability to record
associated whiteboard or data streams can also be checked if these elements are
available on the source.
NOTES:
•
The timing relationship of the elements contained within the stream is
maintained by the recorder.
•
The information from each recorded element is placed into its own folder
within the chosen directory. If necessary, those folders can be opened and the
individual files of each recorded element can be viewed.
record
Initialize Recording
progress, the time and MB (file size) values steadily increase.
record
on page 76).
(figure 32,
) and click
1
Update
2
2
is clicked. While recording is in
Update
check box and click
Update
is clicked.
Update
gcode Frame Translator Utility
VNM Recorder • Recording and Playing Streams
(figure 32,
).
2
1
1
.
51
Advertisement
Table of Contents
