Table of Contents
Advertisement
Alarm Type
This drop-down menu lists the available alarm error conditions for all units. Alarm error
conditions are divided into two categories:
•
Alarm errors that occur on an encoder
Alarm errors that occur on a decoder
•
In addition, there is one alarm error that only occurs on the device that is configured as the
system controller.
See the
Alarm Reference Tables
Alarm Severity
Alarms may be set to one of three severities.
Alarm Severity
Critical
Warning
None
Applying Alarm Filter Settings
Apply the alarm filter settings by clicking
NOTE: Changes will be lost after the VN-Matrix system is powered down unless the
Save All
section on page 60 for more information.
A red colored traffic light indicator for the device (see
Icons
on page 27) will be displayed.
When triggered, a warning alarm will result. An amber colored traffic
light indicator for the device (see
be displayed.
A setting of
Default (None)
The alarm still appears in the alarms list, but it will not affect any
colored indicators.
Apply Filter Change
tab is clicked to make changes permanent.
Description
Alarm Status
Alarm Status Icons
on page 27) will
effectively filters the alarm condition.
.
VNM Recorder • About Alarms
57
Advertisement
Table of Contents
