Table of Contents
Advertisement
4.
In the
This can be a playback channel source streaming from the VNM Recorder device or a
source streaming from a VN-Matrix encoder.
Figure 29.
NOTE: The playback channels are identified by the recorder device name using the
names video‑player0 to video‑player4. For a single channel record or playback
system, always choose video‑player0.
5.
Click
Update
6.
Click the
decoder. For information on advanced decoder setup, see the VN-Matrix 200, 225,
300, or 325 user guides.
Setting up a VN-Matrix Codec as an Encoder
1.
From the
Device page appears.
2.
In the Device Setup section, click
Setup section is not visible, click
Figure 30.
3.
Click the
encoder with an auto-detect source input mode. For information on advanced encoder
setup, see the VN-Matrix 200, 225, 300, or 325 user guides.
drop-down menu, choose the appropriate source (see figure 29,
Source
1
1
Choose the Video Source
(see figure 29,
).
2
tab in the top menu bar. The codec is now configured as a basic
Save All
Device List
page (see page 26), click on a VN-Matrix codec device. The
change device type
Create Source
tab in the top menu bar. The codec is now configured as a basic
Save All
VNM Recorder • Recording and Playing Streams
2
2
(see figure 30,
create source
to change the view.
1
1
).
1
). If the Device
1
49
Advertisement
Table of Contents
