Table of Contents
Advertisement
Playing a Recorded Stream
All elements of a recording are loaded when a recorded file is selected for replay at a later
time and cannot be separated from the recording. The video element is always replayed.
The optional elements may be enabled or disabled for replay, provided they are present in
the original recording.
Playback Preparation
To prepare a stream for playback, follow the procedure below.
1.
2.
3.
4.
Ensure that the VN-Matrix codec is configured as a decoder with a VNM Recorder
channel set as the
Source
on page 48).
From the
Device List
page (see page 26), click on the VNM Recorder device. The
Recorder Device
page (see page 28) appears.
From the
Recorder Device
Player
page (see page 35) appears.
In the Listing Directory, click on the media stream that will be played back. The stream
appears on channel 1 (see figure 33,
1
1
2
2
Figure 33.
Player Page
See
About the Content Directory
navigate within the directory.
NOTES:
•
If the listing section (see figure 33,
the list. Also be sure to check that the listing section is not minimized by
clicking on the
Listing
•
The Listing Directory shows the contents of the location indicated by the
field. This will be the last location visited on the
Current Path
(page 35),
Navigate
•
The
Current Path
storage location (see
device (see
Setting up a VN‑Matrix Codec as a Decoder
page (see page 28), click the
).
1
on page 43 for more information on how to
) is empty, click the folder icon to refresh
2
tab.
page (page 32), or
Config
field defaults to the folder that is saved as the default
Setting a Stream Storage Location
VNM Recorder • Recording and Playing Streams
icon. The
Player
Player
page
page (page 38).
on page 45).
52
Advertisement
Table of Contents
