Table of Contents
Advertisement
9.
If changes were made, a dialog box appears asking to confirm the changes. Click
to confirm and save the changes (see figure 13).
Figure 13.
Confirm Settings Window
10.
The following dialog box appears (see figure 14). Click
Figure 14.
Settings Saved Window
11.
A loading dialog box appears and the necessary changes are made to the system. After
the loading dialog box disappears, navigate back to the Network Configuration window
and check that the status of the
12.
Close the Network Configuration window.
VNM Recorder • Recorder Configuration and Hardware Setup
to continue.
OK
device now reads Active.
eth0
Yes
19
Advertisement
Table of Contents
