Table of Contents
Advertisement
channel — There are five channels that can be used for playback. Each playback
4
channel contains the following parameters.
prefix — Displays the name of the selected file. Only the first 11 characters of the
•
filename are displayed.
sid — Displays the identification number of the filename.
•
date — Displays the date when the file was recorded.
•
start — Displays the time when the file started recording.
•
finish — Displays the time when the file stopped recording.
•
video — By default, this check box is always selected for video playback. Click on
•
the icon to the right of the check box to go to the video
audio — If audio is present in the recording, select this check box to play back
•
the audio stream. Click on the icon to the right of the check box to go to the audio
Config
page (see page 38).
wb — If whiteboard data (user annotation) is present in the recording, select this
•
box to play back the whiteboard stream. Click on the icon to the right of the check
box to go to the whiteboard
data — If data is present in the recording, select this box to play back the data
•
stream. Click on the icon to the right of the check box to go to the data
page (see page 38).
NOTE: For more information on the Config page, see
page 38.
Listing Directory — Also known as the Content Directory, this panel allows for
5
content selection and navigation between directories. This panel also shows the current
file storage location. For more information on how to use this panel, see
Content Directory
on page 43.
Config
page (see page 38).
VNM Recorder • About the Web-based User Interface
Config
page (see page 38).
Config
Config Page
on
About the
37
Advertisement
Table of Contents
