Advanced Configuration
This section provides information on the web-based interface pages used for advanced
configuration of the VNM Recorder. The advanced configuration pages associated with the
VNM Recorder are listed below.
•
•
Config Page
This page is accessed by selecting the VNM Recorder device on the
(see page 26), selecting the
Recorder Device
audio, wb, and data columns (see
1
1
4
4
5
5
6
6
7
7
Figure 24.
NOTES:
The Config page modifies a single channel element of a VN-Matrix stream. This page is
primarily used to monitor the current number of transport connections as well as to select
or unselect
RTP streaming. The other control options on this page are detailed for reference purposes.
The control options for the Config page are detailed on the next page.
Config Page
Accounts Page
Player
page (see page 28), and then clicking on one of the icons in the video,
3
3
Config Page
•
The settings on this page should not be modified since most of the settings in a
recording are controlled from the Player page. The only exception to this is when
enabling multicast transport for a selected playback stream by selecting the
check box.
Multicast Enable
•
Transport protocols must be kept consistent between the video and audio
elements.
Multicast Enable
VNM Recorder • About the Web-based User Interface
icon located on the Configuration panel of the
channel
on page 37).
2
2
(see
Streams panel
on page 40) when using
Device List
page
38