Table of Contents
Advertisement
Login Information
NOTES:
•
A mouse, keyboard, and monitor must be connected to the VNM Recorder to log in
to the unit itself.
•
Login information is case sensitive.
•
It is only necessary to log in to the VNM Recorder when it requires configuration.
The VNM Recorder does not require login information for normal operation.
Log in to the VNM Recorder using the Red Hat
on the previous page). The default login information is as follows.
•
Administrator username
•
Administrator password
•
Guest username
•
Guest password
If necessary, the
be changed. New
NOTE: The procedures detailed within this guide use the
and
password
username
using the guest login information (or a created personal login) to access the recorder
so that important configuration settings cannot be changed.
To change the administrator password:
1.
From the menu bar on the desktop, select
Root
Password
2.
If prompted for an
default administrator password is listed above.
3.
Follow the remaining prompts to change the password.
To add or change usernames and passwords:
1.
From the menu bar on the desktop, select
Users and Groups
2.
The User Manager window appears. Use this window to add, modify, or delete users.
Click on the
— root
— Extron2010
— matrix_rec
— matrix
administrator password
can also be added.
usernames
to configure the recorder. It is recommended that the
and
are only given to those who require it. Others should be
password
.
administrator password
.
menu for more information.
Help
VNM Recorder • Recorder Configuration and Hardware Setup
Enterprise Linux
login page (see
®
®
,
, and
guest username
guest password
administrator username
System > Administration >
, type in the appropriate password. The
System > Administration >
figure 8
can
administrator
14
Advertisement
Table of Contents
