Table of Contents
Advertisement
Preparation for Using the gcode Frame Translator Utility
The gcode utility is run in a command window on the recorder where the required recording
is stored.
A command window may be opened from a remote Windows PC using WinSCP.
Using WinSCP and PuTTY
1.
•
•
•
•
2.
Open WinSCP and enter the IP address of the VN-Recorder. Use the following
parameters to log in.
=
Port number
22
=
File protocol
SFTP
=
User_name
matrix_rec
=
Password
matrix
WinSCP Login
Session
Session
Stored sessions
Host name:
Environment
10.100.247.87
Directories
SSH
User name:
matrix_rec
Private key file:
Protocol
SFTP
File protocol:
Advanced op ons
Login
Figure 49.
WinSCP Login
Select
. The directory structure of the VN Recorder is displayed:
Login
1 1
2 2
Figure 50.
VN Recorder Directory Structure
By default, recordings are held in the
and the gcode Utility is located in the
only one VNRecorder directory will be present; if the recorder has been upgraded, use
the current version directory.
VNM Recorder • gcode Frame Translator Utility Instructions
X
?
Port number:
22
Password:
Allow SCP fallback
Select color
Save...
Close
directory (see figure 50,
Recording_Files
VNRecorder_verx.y.z
)
1
directory (
). Usually,
2
77
Advertisement
Table of Contents
