Table of Contents
Advertisement
Introduction
This section provides an overview of the user guide and describes the Extron
VN-Matrix (VNM) Recorder and its features. Topics that are covered include:
•
•
•
•
•
About this Guide
This guide contains installation, configuration, and operating information for the
VNM Recorder.
In this guide:
•
•
•
•
About the VNM Recorder
The VNM Recorder connects to a network and is used to digitally record and play back
multiple PURE3
VNM Recorder is used with any VN-Matrix application to document, archive, review, and
play back highly sophisticated or demanding AV imagery.
The VNM Recorder has the ability to record PURE3 encoded IP streams on each channel.
Up to five PURE3 streams can be recorded or played back on a single recorder. PURE3
streams recorded together maintain proper synchronization on playback.
The VNM Recorder uses a network storage architecture which makes systems highly
scalable and flexible. Storage capacity can be increased or decreased based on the number
of inputs, recording time, and archiving requirements.
About this Guide
About the VNM Recorder
Transport Protocols Used for Streaming
Definitions
Features
The term "recorder" refers specifically to the VNM Recorder.
The term "codec" refers to either a VN-Matrix encoder or decoder.
The term "stream" refers to multimedia that is constantly received by (and normally
presented to) an end-user while being delivered by a VN-Matrix encoding device.
The term "element" refers to the video/graphics, audio, data, and whiteboard
(user data) content that is contained within a stream.
streams via the IP network of VN-Matrix encoders and decoders. The
®
VNM Recorder • Introduction
1
Advertisement
Table of Contents
