Opening A Command Line Window - Extron electronics VN-Matrix User Manual

Opening a command line window

1.
Use PuTTY to open a command window session from WinSCP. From the
menu, select
1 1
Figure 51.
A command line window opens with a password prompt:
Using username "matrix_rec".
matrix_rec@10.100.247.87's password:
Figure 52.
2. Enter
matrix
The command line window opens at the following directory location:
/home/matrix_rec
Use the command line window to enter the gcode commands that are described in the
following section.
(see figure 51,
Open in PuTTY
Open a Command Window Session
PuTTY Password Prompt
and press <Return>.
VNM Recorder • gcode Frame Translator Utility Instructions
).
1
Commands
78