Table of Contents
Advertisement
Recording and
Playing Streams
NOTE: It is recommended that all devices within the VN-Matrix network contain the
This section provides information on:
•
•
•
•
If necessary, refer to the information in the
section on page 25 while following the various procedures below.
Initial Setup and Configuration
This section talks about how to set up each VN-Matrix as a decoder or encoder.
NOTE: All connections (streams) must be removed from the VN-Matrix system before a
Setting up a VN-Matrix Codec as a Decoder
1.
2.
3.
same version of firmware to avoid communication and compatibility issues. Check that
each device contains the same version of firmware by using the Device page of the
web-based user interface. To update the VNM Recorder firmware, see the
Updates
section on page 63.
Initial Setup and Configuration
Recording a Stream
Playing a Recorded Stream
Using Bookmarks
codec can be assigned as an encoder or a decoder.
From the
Device List
page (see page 26), click on a VN-Matrix codec device. The
Device page appears.
In the Device Setup section, click
Setup section is not visible, click
Figure 28.
Device Setup
Click the
icon. The Display page appears.
display0
Web‑based User Interface Control Options
(see figure 28,
create display
to change the view.
change device type
1
1
VNM Recorder • Recording and Playing Streams
Firmware
). If the Device
1
48
Advertisement
Table of Contents
