Table of Contents
Advertisement
Stage 3 — Restart the VNM Recorder
Restart the VNM Recorder. See
Configuring the VN-Matrix Encoders and Decoders
For the VNM Recorder to function properly, update each VN-Matrix device to point to the
new IP address of the controller device. For information on how to configure the encoders
and decoders, see the VN-Matrix 200 Series User Guide, VN-Matrix 225 Series User Guide,
VN-Matrix 300 User Guide, and the VN-Matrix 325 User Guide.
NOTE: The VNM Recorder can operate with unicast (RTP and TCP) or multicast
streams. Keep this in mind when setting up and configuring the encoders on a
VN-Matrix network.
VNM Recorder • Recorder Configuration and Hardware Setup
VNM Recorder Power Down Procedure
on page 15).
22
Advertisement
Table of Contents
