Table of Contents
Advertisement
3
4
VN-Matrix Encoder and Decoder Configuration
The user interface pages discussed in this guide are associated with the VNM Recorder. The
VN-Matrix encoders and decoders may need to be configured using the other pages of the
web-based user interface for the system to operate properly. For more information on how
to configure the encoders and decoders, see the VN-Matrix 200 Series User Guide,
VN-Matrix 225 Series User Guide, VN-Matrix 300 User Guide, and the VN-Matrix 325
User Guide.
Clock Management
The
field displays the date and time the user interface page was served.
Current Time
Use the
field to update the date and time. Use the following guidelines and
New Time
refer to
figure 25
on the previous page when updating the date and time.
The entry should be input in an identical format shown in the
•
year-month-date hours-minutes-seconds.
The year should include the century (for example, 2012).
•
The month is represented by a two digit number from 01 through 12.
•
The date is represented by a two digit number from 01 through 31.
•
Hours are represented by a 24 hour clock using two digit numbers from
•
00 through 23.
Click on
to save the date and time entered in the
Change Time
Controller Licensing
DO NOT place information for a device license into this area.
ATTENTION:
Doing this may cause the VNM Recorder to stop responding. This area is used
for controller licenses only (see the
information about device licenses).
ATTENTION:
Ne placez PAS d'informations sur une licence d'appareil à cet
endroit. Cela pourrait bloquer la communication avec l'enregistreur VNM. Cette
zone est réservée aux licenses des contrôleurs uniquement (voir le
Licensed Features
à la page 29 pour obtenir des informations sur les licences
des appareils).
In addition to each device containing a device license, the VN-Matrix system also
includes a controller license. The controller license manages the number of
connections that can be made simultaneously when using the VNM Software Decoder
(part number 29-098-01).
To obtain a new controller license, follow the procedure below:
1.
Contact the Extron S3 Sales and Technical Support Hotline and provide the
following information.
The serial number of the VN-Matrix device configured as the system
•
controller. This can be obtained from the back of the device.
The order number of the VN-Matrix device.
•
2.
The Extron S3 Sales and Technical Support Hotline provides an options key and a
checksum.
Enter the options key into the
•
Enter the checksum into the
•
3.
Click
Change License
VNM Recorder • About the Web-based User Interface
Licensed Features panel
field.
Options
field.
Checksum
to save the new license.
field:
Current Time
field.
New Time
on page 29 for
tableau
42
Advertisement
Table of Contents
