Table of Contents
Advertisement
Figure 38 shows example
represents important information that will be needed during firmware installation.
Figure 38.
Installing the Firmware
Use the following procedure to install the firmware onto the VNM Recorder.
1.
2.
3.
4.
config.xml
Config.xml and Admin.xml Text Files
From the menu bar of the VNM Recorder desktop, select
Accessories > Terminal
Change to super user mode by typing in the following command and pressing the
<Enter> key.
•
su
When prompted for a password, type in the following and press the <Enter> key.
•
Extron2010
Change the directory of the terminal window by typing in the
the location of the extracted firmware (see
press the <Enter> key.
For example:
•
cd /home/matrix_rec/3.10.9
NOTE: This folder name is only an example to illustrate how to write the
command line. After typing in the
folder location for your extracted firmware (see
Step 9
on page 64).
and
files. The text in bold and underlined
admin.xml
.
Preparing the Firmware
command, you must enter the correct
cd
VNM Recorder • Firmware Updates
Applications >
command followed by
cd
on page 63). Then
Preparing the Firmware ‑
65
Advertisement
Table of Contents
