Table of Contents
Advertisement
8.
Secure the outer rails to the rail brackets.
NOTE: The two outer rails are left and right specific.
9.
Line up the inner rails on the recorder with the outer rails on the rack. Gently slide the
recorder into the outer rails of the rack (see
necessary, when sliding the recorder into the outer rails.
10.
Connect the necessary devices to the recorder (see the
on page 8 and the
Rear Panel Features
11.
When the recorder is pushed completely into the rack, the locking tabs make a clicking
noise. If necessary, secure the rack handles to the rack to keep the recorder in a fixed
position.
Figure 48.
Installing the VNM Recorder into a Rack
figure
48). Depress the locking tabs, if
Front Panel Features
section on page 10).
Rail Brackets
VNM Recorder • Mounting
section
75
Advertisement
Table of Contents
