Table of Contents
Advertisement
Recorder Page
This page is accessed by selecting the VNM Recorder device on the
(see page 26) and then clicking the
Recorder Device
1
1
5
5
Figure 21.
The Recorder page controls the recording functionality of the VNM Recorder. The recorder
is capable of recording up to five simultaneous channels. Each channel contains one video
stream. In addition, a channel may also contain audio and data elements if these are present
and enabled at the encoder.
NOTES:
•
The audio and data elements can be recorded, but in order to do so, those
elements must be selected using the appropriate check boxes (
data
•
The ability of the VNM Recorder to record multiple streams depends on the
bandwidth of the source data streams and the disc writing capability of the recorder
hardware.
name — The device name can be modified by editing this field and clicking
1
The name should be comprised of letters, numbers, and the underscore character.
Spaces can be used, but should be avoided if possible.
Storage Path — Data is recorded in the directory specified in this field. This is modified
2
on the Navigate page that can be accessed by clicking on either the
or the
the storage path (see
Bookmark button — Clicking on this button during a recording sets a reference point
3
within the stream that can be retrieved later. A new reference point is placed within the
stream each time the button is pressed and allows for multiple reference points to be
set (see
NOTE: The bookmark button on this page only works while recording a stream.
Bandwidth — This drop-down menu is used with the
4
and a source element from the menu and use the
statistics. For more information on monitoring bandwidth, see the VN-Matrix 200 Series
User Guide, VN-Matrix 225 Series User Guide, VN-Matrix 300 User Guide, and the
VN-Matrix 325 User Guide.
Recorder
page (see page 28).
2
2
4
4
Recorder Page
).
tab at the top of the Recorder page. For more information on changing
Navigate
Navigate Page
Using Bookmarks
on page 54).
VNM Recorder • About the Web-based User Interface
Device List
icon located on the Configuration panel of the
on page 32).
Bandwidth
tab to monitor bandwidth
Bandwidth
page
3
3
,
, and
audio
wb
.
Update
link
Storage Path
tab. Select a channel
30
Advertisement
Table of Contents
