Table of Contents
Advertisement
name — The channel name can be modified by editing this field and clicking
1
This name is visible during source selection on a decoder (display) as well as during file
selection on a recorder. The name should be comprised of letters, numbers and the
underscore character. Spaces can be used, but should be avoided if possible.
Playback Controls — See the
2
netSlave (not shown) — See the
.
should not be modified on this page.
NOTE: The
netSlave
other selections, only
slave to master — Checking this box causes the current player channel to synchronize
3
its playback control to its local master channel (Video channel-0).
NOTES:
•
This setting is enabled by default and should not be modified.
•
The
slave to master
video‑player0
When checked, all video channels are always synchronized to Video channel-0. This
•
allows the playback controls to affect all of the playback channels simultaneously.
When unchecked, individual playback channels can be controlled using the
•
playback controls.
NOTE: The audio, whiteboard, and data elements are always synchronized to
their associated video channel.
auto repeat (not shown) — See the
.
NOTE: The
auto repeat
For all other selections, only
Media panel — This panel contains the following parameters.
4
NOTE: The information contained in this panel is created from information supplied
by the Player page and should not be modified unless absolutely necessary.
Playback Path — Type in the location of the file or directory or choose a file from
•
the Content Directory to automatically fill in this field.
NOTE: Typed in changes made to this field will only be implemented when
is clicked.
Update
Playback Date — This is automatically filled in when a file has been chosen from
•
the Content Directory or when a file location is manually entered into the
field.
Path
Playback Start — This is automatically filled in when a file has been chosen from
•
the Content Directory or when a file location is manually entered into the
field.
Path
Playback Finish — This is automatically filled in when a file has been chosen from
•
the Content Directory or when a file location is manually entered into the
field.
Path
Player Page
section on page 35.
Player Page
section on page 35. This setting
option is only available when video-player0 is selected. For all
is available.
slave to master
check box is available on all channels except
.
Player Page
option is only available when video-player0 is selected.
slave to master
VNM Recorder • About the Web-based User Interface
Update
section on page 35.
is available.
Playback
Playback
Playback
.
39
Advertisement
Table of Contents
