Table of Contents
Advertisement
Device Setup panel — This panel controls various global actions for the device.
2
Device Type — This field will always display
•
VNM Recorder and cannot be changed.
NOTE: When this field displays
device is a codec, encoder, or decoder.
Mode — A device can be configured using four modes.
•
NOTE: This configuration option is not available for the VNM Recorder. These
modes are detailed for reference purposes.
enable — This is normal operation.
•
disable — Using this mode on a source device stops streaming to the
•
network, but still shows pass-through output. Using this mode on a display
device outputs a splash screen in place of normal data.
standby — Using this mode on a source device stops streaming and disables
•
pass-through output. Using this mode on a display device disables all output.
VN-Matrix 300 / 325 devices do not support standby mode.
test — Using this mode on a device (source or display) shows a splash screen
•
with the words "Test Mode". Normal streaming is suspended.
Data Interface — This option allows the streaming interface to be specified.
•
Currently, the only option available is
network interface.
Multicast TTL — This field is used to specify the number of hops multicast traffic
•
will make between routed domains when it exits a source. It is not used for TCP or
unicast RTP traffic and is only used on a source.
Licensed Features panel — This panel is used to manage the device license and
3
indicates what features the user has access to. If the device has an incorrect checksum
for the licensed features, a license error message will be shown and the device will not
support streaming functions.
NOTE: The VNM Recorder contains a default license that allows for five recorder
channels and five player channels. It is currently not possible to change the device
license on the VNM Recorder (see
DO NOT place information for a VNM Enterprise Controller license
ATTENTION:
into this menu. Doing so causes the device to stop responding.
Ne pas mettre d'informations pour une licence VNM contrôleur
ATTENTION:
entreprise dans ce menu. Si c'est le cas l'appareil risque d'arrêter de répondre.
Configuration panel — This panel indicates what features the user is able to control.
4
Each device consists of a number of components which are accessed by clicking on
the appropriate links.
The
icon accesses the pages that manage the recording of VN-Matrix
Recorder
PURE3 streams to the VNM Recorder hard disk.
The
icon accesses the pages that manage the playback of previously
Player
recorded VN-Matrix PURE3 streams.
storage
,
, or
none
source
, which uses the eth0 (primary)
Cat6
Controller Licensing
VNM Recorder • About the Web-based User Interface
as the device type for the
, it means that the
display
on page 42).
29
Advertisement
Table of Contents
