Internal Web Page; Overview Of The Internal Web Page; Accessing The Internal Web Page - Extron electronics SSP 200 User Manual

Internal Web Page

This section gives an overview of the SSP 200 internal web page. Topics include:
•
•
•

Overview of the Internal Web Page

The SSP 200 internal web pages provide the software user interface for operating and
configuring the SSP 200 via a PC on the same network. This allows you to:
•
•
•
•
•
Connection is made via a LAN or WAN connection through the rear panel LAN (RJ-45) port,
using a web browser such as Microsoft
Apple

Accessing the Internal Web Page

To access the internal web pages:
1.
2.
3.
4.
Overview of the Internal Web Page
Accessing the Internal Web Page
Web Page Components
View and edit the device name
Set the date and time either manually or to sync with a connected PC
View input and output details
View and edit the network settings
Update the firmware version
Safari .
® ®
Using an RJ-45 cable, connect the device to a LAN via the rear panel LAN port (see
Rear Panel Features on page 6).
Launch the web browser on your computer.
Enter the device IP address into a web browser address bar. If the IP address has not
been changed, the default address is 192.168.254.254.
Press the keyboard <Enter> key. The SSP 200 web page requires user authentication
to continue. Click in the Password field and enter the appropriate administrator or user
password. Click OK.
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. Passwords are case sensitive. If the SSP 200 is
reset, the passwords revert to the default, which is extron.
Edge , Mozilla Firefox , Google Chrome
® ® ® ®
SSP 200 • Internal Web Page
, or
™
80