Changing The Realm; Deleting The Realm - Ricoh 917F Operating Instructions Manual

1. System Settings

Changing the Realm

This section describes how to change the programmed Realm.
1
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using [ ] or [ ], and then press the [OK] key.
3. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
4. Select [Prog./Change/Delete Realm] using [ ] or [ ], and then press the [OK] key.
5. Select [Program/Change] using [ ] or [ ], and then press the [OK] key.
6. Select the Realm you want to change using [ ] or [ ], and then press the [OK] key.
7. Set each item as necessary.
8. Press the [OK] key after setting each item.
9. Press the [User Tools/Counter] key.

Deleting the Realm

This section describes how to delete the programmed Realm.
1. Press the [User Tools/Counter] key.
58