Jbig Reception; Auto Fax Reception Power-Up - Ricoh 917F Operating Instructions Manual

• If an e-mail transfer request is received when the "SMTP RX File Delivery" is "Off" in the Fax Features
menu, this machine responds with an error message to the SMTP server.
• You can make settings that limit transfer to specified originators.
• Using this function, you can also send documents from your e-mail application to e-mail addresses
and G3 fax machines' destinations through this machine simultaneously.
• For the maximum number of destinations you can program in a group, see "Maximum Values".
• The Fax Features menu provides a user parameter setting (switch 32, bit 0) that allows you to select
a priority order for alternative destinations for sent documents. When this parameter is set, if the
specified receiver is a group destination that includes an address not registered for the specified
transmission type, the document is routed to an alternative destination. See "Parameter Settings".
• p.203 "E-mail Settings"
• p.226 "Parameter Settings"
• p.258 "Maximum Values"

JBIG Reception

If you use JBIG (Joint Bi-level Image Experts Group) compression, you can send photographic originals
faster than with other methods of compression. It allows you to receive documents sent in the JBIG format
through JBIG Transmission.
• This function is not available with Internet Fax function and Mail to Print functions.

Auto Fax Reception Power-Up

This machine can be set to shut down automatically if no one has used it for a while. In these situations,
even though the operation switch is off, the machine can still receive incoming documents as long as the
main power switch is on.
• Reception is not possible if both the operation switch and the main power switch are turned off.
• You can set whether documents are printed as soon as they are received (Immediate Reception) with
the User Parameter (switch 14, bit 0) in the Fax Features menu. See "Parameter Settings".
• You can also have fax documents received by Memory Reception (Substitute Reception) printed after
the machine is turned on.
Reception Functions
3
141