Immediate Tx Result Report (Immediate Transmission); Communication Failure Report - Ricoh 917F Operating Instructions Manual

• p.226 "Parameter Settings"

Immediate TX Result Report (Immediate Transmission)

If you turn this report on, a report is printed after every Immediate Transmission so you have a record of
whether the transmission was successful or not.
If the machine is set up not to print this report and the fax document could not be successfully transmitted,
the Error Report is printed instead.
• You can switch this report on or off in the User Parameter (switch 03, bit 5) in the Fax Features menu.
• If user authentication is set, you can select whether to display a destination with the User Parameter
(switch 04, bit 4) in the Fax Features menu.
• For details about Parameter Setting, see "Parameter Settings".
• To view the report without text disruption, select a font of even character width in your e-mail
application's settings.
• If the page was sent successfully, the Page column gives the total number of pages sent successfully.
• p.226 "Parameter Settings"

Communication Failure Report

This report is printed when a document could not be successfully transmitted with Memory Transmission.
If the machine is set up to print a Communication Result Report, this report is not printed. Use it to keep a
record of failed transmissions so you can send them again.
• You can select whether the Communication Failure Report is automatically printed using the User
Parameter (switch 04, bit 1) in the Fax Features menu.
• This report is only printed if the Communication Result Report is turned off and a document could not
be successfully transmitted with Memory Transmission.
• You can select whether to include part of the original image on the report with the User Parameter
(switch 04, bit 7) in the Fax Features menu.
• If user authentication is set, you can select whether to display a destination with the User Parameter
(switch 04, bit 4) in the Fax Features menu.
• If user authentication is set, you can select whether to display a sender name with the User Parameter
(switch 04, bit 5) in the Fax Features menu.
• For details about Parameter Setting, see "Parameter Settings".
Checking the Transmission Result (TX File Status)
4
159